Anyone done a 3rd Function for a MF GC2400

   / Anyone done a 3rd Function for a MF GC2400 #1  

blackd

Platinum Member
Joined
Mar 16, 2002
Messages
650
Location
So MD
Tractor
Yanmar FX24D replaced with Massey GC2400
I'm planning on building a grapple for my FEL bucket, and need some info on how to connect hydraulics without using a diverter. Anyone experienced?
 
   / Anyone done a 3rd Function for a MF GC2400
  • Thread Starter
#2  
What I intend to do is add a connection to the output port of the existing valve. Running it to a 2nd spool valve. Then from that new spool valve's output add a connection to that disconnected line from the output port of the existing valve. I think this output line goes to the transmission (holding tank). If I am correct this is the same/similar as replacing the current 2 spool with a 3 spool system. Can anyone see any problems with this?
 
   / Anyone done a 3rd Function for a MF GC2400 #3  
Subscribed, looking into this as well.
 
   / Anyone done a 3rd Function for a MF GC2400
  • Thread Starter
#4  
Ken, I've slowed down on my implementation. I have the parts, except maybe a Tee connection for the tank return line (if I decide that's how I want to hook up). One day soon I will do the rough connection and test. It all depends on how cold and snowy Winter gets. Installing the snow plow comes first if it gets snowy, and that goes on the existing FEL lines.
 

Tractor & Equipment Auctions

2022 Wacker Neuson SM100 Mini Skid Steer (A51039)
2022 Wacker Neuson...
2004 STERLING LT9500 SERIES MIXER TRUCK (A50854)
2004 STERLING...
2005 Construction Trailer Specialists BDT-40 Bottom Dump T/A 40ft Trailer (A49461)
2005 Construction...
2003 Big Tex 10PI 16ft. T/A Pipe Top Utility Trailer (A49461)
2003 Big Tex 10PI...
2019 GENIE Z-45/25XC V2 TELESCOPIC MANLIFT (A51242)
2019 GENIE...
1999 24DTA pintle hitch trailer (A51039)
1999 24DTA pintle...
 
Top