Anyone done a 3rd Function for a MF GC2400

   / Anyone done a 3rd Function for a MF GC2400 #1  

blackd

Platinum Member
Joined
Mar 16, 2002
Messages
650
Location
So MD
Tractor
Yanmar FX24D replaced with Massey GC2400
I'm planning on building a grapple for my FEL bucket, and need some info on how to connect hydraulics without using a diverter. Anyone experienced?
 
   / Anyone done a 3rd Function for a MF GC2400
  • Thread Starter
#2  
What I intend to do is add a connection to the output port of the existing valve. Running it to a 2nd spool valve. Then from that new spool valve's output add a connection to that disconnected line from the output port of the existing valve. I think this output line goes to the transmission (holding tank). If I am correct this is the same/similar as replacing the current 2 spool with a 3 spool system. Can anyone see any problems with this?
 
   / Anyone done a 3rd Function for a MF GC2400 #3  
Subscribed, looking into this as well.
 
   / Anyone done a 3rd Function for a MF GC2400
  • Thread Starter
#4  
Ken, I've slowed down on my implementation. I have the parts, except maybe a Tee connection for the tank return line (if I decide that's how I want to hook up). One day soon I will do the rough connection and test. It all depends on how cold and snowy Winter gets. Installing the snow plow comes first if it gets snowy, and that goes on the existing FEL lines.
 

Tractor & Equipment Auctions

2018 Chevrolet Tahoe 4x4 SUV (A50324)
2018 Chevrolet...
1968 International Harvester 856D 2WD Tractor (A50657)
1968 International...
2022 Case IH Steiger 470HD AFS Connect RowTrac 4WD Tractor (A50657)
2022 Case IH...
2012 CATERPILLAR 259B3 SKID STEER (A51242)
2012 CATERPILLAR...
GENERATOR HOUSE POEWERED BY TWIN 550HP (60 SERIES)  DETROIT 14.0L ENGINES (A50854)
GENERATOR HOUSE...
2019 Allmand Light tower (A49461)
2019 Allmand Light...
 
Top