Anybody have issues with Titan attachments? Full-size skid steer, two mini skid adapter.

[SHIFTY]

Update below :
Curious, any anybody else had issues they’re not getting resolved, I pre-ordered a full-size skid steer to mini skid steer adapter plate from Titan, the prom I have is with the pin spacing, one pin is welded further rearwards snd the top mounting edge has a bow to it, the person who handled the warrantees for the offer a 20% discount as they want me to get an estimate from a fabrication company to repair it, they don’t want to hear about time and material at Titan. I offered them to swap it out ,the best I’ve got from then is a 20%, I paid over $800 with delivery and handling fee. I’ve tried mini skid steer attachments from multiple manufacturers they all have the same issue, could I remount the holes on the attachments I have yes, but I can’t borrow or rent anything to put on this plate
Update- took a few emails but they did correct the issue, can’t delete the post

 

[Gordon Gould]

I bought a tractor SSQA plate from them. What they shipped me was 1/2" to tight. They offered me the same deal. Basicly take it or leave it ?? Lucky for me I was able to fix it my self pretty easily.

Needless to say I don't even look at what they have to offer now.

gg

 

[TWD]

I have a couple cheap attachments from them and they are all sloppy... one wasn't too bad but as soon as I lifted something heavy it pretzel, resulting in $2000 in replacing my kubota FEL QA entirely with new stuff... which was fun, the kubota oem new parts were built like **** and I had to re-weld and fix them too. Not only twisted torque tube but everything else \ mounting plates etc... too!

Supposedly Titan fixed their fitment issues, sounds like they did not. I learned my lesson and won't buy China attachments anymore, they cost me way too much headache, dangerous and ultimately $$ to keep them operating. $500 fork attachment ended up being 2500$ when a 900-1500$ attachment would have been 1000$ or more cheaper in the long run.

 

[Williy]

From what I have read Titan products are a NO NO the company that split from them is the one that's OK to purchase from better quality

willy

 

[wilso]

I had a similar issue with a titan attachments adapter plate. The pin spacing was off, and I noticed a bow on the top edge. It’s frustrating that Titan only offered a small discount instead of a replacement. Glad to hear they finally resolved it, though.
Thanks for sharing the update!

 

[airbiscuit]

I bought a cheap set of forks from them. They have been just fine.

 

[1 Old Man]

I bought a cheap set of forks from them. They have been just fine.

Same here.

 

[SmallChange]

I bought a cheap set of forks from them. They have been just fine.

Yeah, same here too.