gldwing57
Bronze Member
I have a BH760 hoe on my 3510, the hoe has never seemed to have the power needed,. Specifications for the hoe says it needs 2250 psi to operate correctly.
Question is do I check this at the quick connect going to the hoe or at the jack after iit goes through controls. I would think at the jack with gauge hooked up at pressure hose going to corresponding jack.
Question is do I check this at the quick connect going to the hoe or at the jack after iit goes through controls. I would think at the jack with gauge hooked up at pressure hose going to corresponding jack.
