Another homemade tractor canopy

   / Another homemade tractor canopy #11  
that's a good project , what i used was a fiberglass cover for a chevy truck 6 ft bed
a couple of 2 inch muffler pipes with 45 % bends and the frame rails for a old twin size bed .
to keep Cool I used a 12 volt radiator fan for a Chevy Lumina . just some other idea's for you all .
3yjhXZd.jpg

gd9iDkh.jpg

tOQcdRR.jpg
 
   / Another homemade tractor canopy #12  
That fan looks right at home; great jobs with the canopies!
 
   / Another homemade tractor canopy #13  
The insulation does more than cut down on noise it also helps with radiant heat. I use to have an old backhoe that would cook you under the factory canopy until I put some reflective bubble wrap underneath one day out of desperation.

When I built my shed, I added fiberglass insulation in the ceiling,, with hopes that it would stay cool.
WOW,, it is incredible,,
The shop stays cool all summer,, except for one or two "blistering" days,, the shop is always cool enough to work.

The insulation does zero for holding in heat during the winter,
I have no way of heating the building,, (too many air leaks)

If I have to do something in the winter, I use a couple radiant propane heaters that get moved close to the project,
 
   / Another homemade tractor canopy #14  
When I built my shed, I added fiberglass insulation in the ceiling,, with hopes that it would stay cool.
WOW,, it is incredible,,
The shop stays cool all summer,, except for one or two "blistering" days,, the shop is always cool enough to work.

The insulation does zero for holding in heat during the winter,
I have no way of heating the building,, (too many air leaks)

If I have to do something in the winter, I use a couple radiant propane heaters that get moved close to the project,

Yep metal in direct sunlight becomes a radiant heater.
 
   / Another homemade tractor canopy
  • Thread Starter
#15  
Yep metal in direct sunlight becomes a radiant heater.

I see where you were coming from now, the shade part isn’t metal, just the frame. The cover is a “drop“ of high impact plastic I had left over from a gas powered rotary broom project.

Metal will get hot in sun for sure, in the summer my smokers read 150 F Before you start the fire.
 

Tractor & Equipment Auctions

2005 Superior Trailers VT130 T/A Vacuum Trailer (A51692)
2005 Superior...
2023 Third Coast Equipment RA12H Vibratory Articulating Tandem Smooth Drum Roller (A50322)
2023 Third Coast...
John Deere 6430 Side Arm Tractor (A51573)
John Deere 6430...
2014 Fiat 500L Hatchback (A50324)
2014 Fiat 500L...
Super Star Smithco Bunker Rake (A50322)
Super Star Smithco...
27ft x 24ft Metal Building (A51573)
27ft x 24ft Metal...
 
Top