Adding Rear Remotes for Hydraaulic Flail Mulcher

[Kurmond Kubota]

Hi All

I am new at playing with Tractors...
I have a Kubota L3010 tractor with no Hydraulic setup on it at the moment.I am trying to purchase a Flail Mower with Hydraulic offset as I need to get into tight places hence the offset.

I need to start from scratched ,I have the hydraulics on the right side as standard for the Kubota. The Manual says that you can tap into the Hydraulics there but I don't know what other things I need to set up the rear remotes.

In addition I will be adding a FEL in the near future (sorry for the late inclusion )

Thanks in advance

Kumond Kubota

 

[J_J]

On the hyd block, you have a pressure out port and a PB return port from the valve PB port.

Your remote valve should also have these ports if you add the PB adapter.

Just connect the P from hyd blk to the IN on the remote valve.

Connect the PB hose back to the hyd blk.

Connect the OUT.return port to any return line.

There may be a lever you turn when using the ports.

In your current position, the flow is passing through the valve to the 3pt.

You might want to consider a two or three spool valve for T-N-T, or whatever attachments, maybe even float.

The flow is routed a little differently for a FEL.

 

[buickanddeere]

Iirc it's an open centre system . Keep that in mind when choosing valves and relief settings.