Help! I need to add quick connect hyd. lines to operate a 3 pt hitch backhoe with my Kubota L3830. The tractor has a front end loader but no aux. hydraulics on the rear. I've gone through the parts diagrams and identified the hyd. distrubution block and which line is power beyond, pressure and tank return. Also identified the power beyond port, pressure port and return on the loader valve assembly. My question is; where is the proper place to tap into the lines and ultimately, which lines. I'm a bit confused by the power beyond line and pressure line. I'm told by other sources that since the backhoe attachment has it's own control valves, all I need is to tap into the power beyond line for pressure and a tank return line coming back in--is this correct? Also, I've checked with Kubota Parts and they make all kind of kits for adding remote valves but all of them include a "valve" or some kind of control assembly, which I don't need. Another question, if anyone is familiar with these Kubota optional hydraulic kits; does the kit for these add-on rear remotes have a hydraulic distribution block that is different from what I have now (just supplying the front end loader) and if so, can that block be bought separate from the complete kit? Any help appreciated, need to start digging.......