Oil & Fuel Adding Fuel Shutoff to Hundred Series

   / Adding Fuel Shutoff to Hundred Series #1  

downslope

Platinum Member
Joined
Mar 11, 2008
Messages
642
Location
NY
Tractor
MF TO-35, Ford(s) 2000, 8N, 9N, White 2-70, NH TD75D, JD 5045D
I think I remember someone posted a picture on here of how they added an additional shutoff valve down near the carburetor on the 4 cyl gas engine. What is the best way to do this? I have a 2000 gas with a sediment bowl on the carb connected with banjo type fitting.

In the mean time I'll try to repair one of the used under-tank shutoffs I have lying around. I don't like to always turn it off under the tank because eventuallly the o-ring starts to leak gas.
 
   / Adding Fuel Shutoff to Hundred Series #2  
Don't know how particular you are about staying "original", but have you considered an inline solenoid shutoff? I put one on an old 430 case that was prone to flooding the engine with gas for no particular reason. Numerous needle and seat replacements never seemed to be enough. The valve was wired to ignition circuit, so it opened when ignition was on. Problem solved.
 

Tractor & Equipment Auctions

2006 International 4400 Lift All LOM15-55-1S 60FT Material Handling Bucket Truck (A51692)
2006 International...
2013 CHEVROLET TAHOE (A53843)
2013 CHEVROLET...
Scaffolding (A52377)
Scaffolding (A52377)
70007 (A51691)
70007 (A51691)
2015 RAM 5500 Bucket Truck w/ Versalift SST40 boom -Cummins Diesel - Auto Trans- 4X4 - 72096 miles (A53473)
2015 RAM 5500...
2004 MACK GRANITE CV713 DUMP TRUCK (A51406)
2004 MACK GRANITE...
 
Top