adding a third remote - how?

[RancherSam]

I'll start by saying that although I'm curious about hydraulics ( hy curious? ), I have little experience beyond attaching implements to the remotes. I have a case jx95 tractor with 2 remotes. I'm thinking about getting anotherset of remotes. What's involved here? I haven't traced the hoses for the remotes back to the source but I'm curious, what do they connect to, the pump or the reservoir? and what's the process for adding another remote? Is it a matter of attaching hoses to the reservoir and adding a switch to divert the flow back to the tank?

 

[wedge40]

I would start by reading this thread.

http://www.tractorbynet.com/forums/hydraulics/113696-hydraulic-diagram-correct.html#post1304779

It give a basic understanding of hydraulic flow and Power beyond.

I'm no expert. I'm still in the learning phase as well. But the diagram in the thread has shed some light on the subject and let me know that I was on the right track when thinking about hydraulics and remotes.


Wedge

 

[MtnViewRanch]

The clean way to have your 3rd remote would be to get the factory set. Probably $500-$600 plus installation. That way you have what belongs there.

Good luck.