Added front and rear remote hydraulics to my CS2410

jabelding · Jan 21, 2024

I needed an extra set of hydraulic ports to be able to adjust my top chute deflector, but I also wanted the possibility of rear remotes as well. So I ordered the optional rear remote kit and then also ordered the extra parts for the front kit, as well as pipes and front disconnect mounts. I then got a couple of tees from Discount Hydraulic Hose online and put it all together. It came out well, and I was happy with the result. Had to do a slight modification to the loader frame so the lower front port can be accessed. the frame is way overbuilt, so the notch won't be an issue.

jabelding · Apr 2, 2024

Got my front chute deflector all installed. I used hoses with built-in swivel ends so the hoses wouldn't twist. It looks like I will get to put it all to the test this week with another spring storm with 12-18" on the way!!

Everhard · Apr 7, 2024

Loooks good! Did you add the cylinder on the shute or is that a factor cylinder? If you added it I'm curious about the dimensions? Might have an application for a cylinder like that..

Thanks,
E.