gengine
Platinum Member
Nice job!
A tale of two welders
- Thread starter Iplayfarmer
- Start date
- Views: 3437
Deano
Veteran Member
Great decision!:thumbsup:
rcowan
Gold Member
The only way this could have been better would be if there was Duct Tape and WD 40 in the story!
RC
RC
OP
Iplayfarmer
Super Member
Sorry. Just electrical tape and CRC lube on a few moving parts on the old welder.
As a follow up to this story, I ended up selling the old AC welder for just over twice what I paid for it. I was happy with that, and the old guy that bought it was more than happy. He told me about how his son had bought him a nice new MIG welder, but that he was used to the old AC stick. I guess he welded many miles of rod in his life. He handled that welder like it was a dear old friend.
PILOON
Super Star Member
The way I spliced was to use short (like 2-3") of copper tubing that fitted the bared leads
and with plumbers torch, flux and solder I simply solder the splice.
A sleeve made from appropriate hose or other rubber tubing acts as insulated protection.
If available to you, heat shrink sleeves are best.
A cheap and effective splice!
and with plumbers torch, flux and solder I simply solder the splice.
A sleeve made from appropriate hose or other rubber tubing acts as insulated protection.
If available to you, heat shrink sleeves are best.
A cheap and effective splice!
OP
Iplayfarmer
Super Member
I have those, too. I'm looking for a steal on some tweeco connectors or something like that to make extensions for the leads I have now.
