95 Ford dually wheels

Newblue · Jan 4, 2012

We picked up a 95 Ford cab chassis dually for my wife and it did not come with a spare tire. I was given a 235/85r16 for a spare so I need a wheel now. The wheels takes flat lug wheel with a pin that I guess locates the wheel on the hub. From what I have been reading there are three offsets for Ford dually wheels but no mention of the hole in the wheels for the pin. The truck is a 95 2x4 cab chassis with a 460 gasser. When I start going to yards I wonder what wheel I should ne looking for?

RDrancher · Jan 4, 2012

Actually had this saved. From where I don't know.

Ford 84-97 F-350 dual rear wheel (Production from 01/85 - for trucks built 12/84 and prior use 8-6.5" pattern, 4.75" bore, stud centered). For 85-97 F-350/450/Superduty dual rear wheel use 8-6.5" bolt pattern, 4.88" bore and are hub centered.

Check offset using a straight edge across the outside of your existing wheels and the measure to the center

Newblue · Jan 5, 2012

Thanks for the info. Is the pin thing a cab chassis only deal or is it all ford duallys of that era? The roll pin sits between two of the lugs. Looks like my offset choices are: 5.00", 5.15", and 5.35"

RDrancher · Jan 5, 2012

It's been a long time since I sold the truck, but I believe the pin is on a plate between the dual wheels. I'm not much help because I really can't remember. Mine was not a cab and chassis truck if that helps. Not sure what the pin is for other than to hold the plate in place.

Newblue · Jan 5, 2012

It has a roll pin sticking out of both the front and rear hubs. The rear one goes from the hub through both wheels in the back. I need to tack a pic.

Thanks for the help,
Mike