72" Box Blade with hydraulic scarifiers (teeth)
- Thread starter bth
- Start date
- Views: 5407
Re: 72\" Box Blade with hydraulic scarifiers (teeth)
Land Pride 35 Series. I have a 3578 with the manual retractable teeth. It is heavy.
Land Pride 35 Series. I have a 3578 with the manual retractable teeth. It is heavy.
Bob_Skurka
Super Member
- Joined
- Jul 1, 2003
- Messages
- 7,615
Re: 72\" Box Blade with hydraulic scarifiers (teeth)
Take a look at these. I just ordered a new box blade yesterday because I wanted a smaller unit to get into tight spaces in addition to the one I currently have. As I had been around to several dealers over the weekend playing with stuff, I stumbled across one dealer who told me about this brand, they didn't have any in stock but order them occasionally for landscapers.
hydraulic assist box blades
Take a look at these. I just ordered a new box blade yesterday because I wanted a smaller unit to get into tight spaces in addition to the one I currently have. As I had been around to several dealers over the weekend playing with stuff, I stumbled across one dealer who told me about this brand, they didn't have any in stock but order them occasionally for landscapers.
hydraulic assist box blades
btolle
Platinum Member
Re: 72\" Box Blade with hydraulic scarifiers (teeth)
If you would fill out your profile we would know where your "area" is. The freight on one would be pretty high so it wouldn't do much good to find one all the way across the country.
Bill Tolle
If you would fill out your profile we would know where your "area" is. The freight on one would be pretty high so it wouldn't do much good to find one all the way across the country.
Bill Tolle
Tim_in_IA
Platinum Member
- Joined
- Feb 14, 2005
- Messages
- 840
- Location
- Eastern Iowa
- Tractor
- Kubota B7610HSD, Mahindra 6500 4WD, JD 440ic crawler, 2 560 farmalls.
Re: 72\" Box Blade with hydraulic scarifiers (teeth)
how much was the 3578?
how much was the 3578?
froggy
Veteran Member
- Joined
- Jul 14, 2001
- Messages
- 1,075
- Location
- Cooke County, Texas
- Tractor
- JD4320 with TNT, electric diverter, cruise control and air suspension seat.
Re: 72\" Box Blade with hydraulic scarifiers (teeth)
Interesting looking box blades. Thanks for the posting.
Interesting looking box blades. Thanks for the posting.
Mark4510
Gold Member
Re: 72\" Box Blade with hydraulic scarifiers (teeth)
I have a 6' Gearmore set up as you describe along with Top N Tilt. http://www.gearmore.com
I could not be happier. Its heavy and really move the dirt around. When I need to dig up the soil, even our heavy red clay when its dry, I dont have any real problems.
It was more money up front but at this point is seems like a really good buy.
Mark
I have a 6' Gearmore set up as you describe along with Top N Tilt. http://www.gearmore.com
I could not be happier. Its heavy and really move the dirt around. When I need to dig up the soil, even our heavy red clay when its dry, I dont have any real problems.
It was more money up front but at this point is seems like a really good buy.
Mark
Glenn9643
Veteran Member
Re: 72\" Box Blade with hydraulic scarifiers (teeth)
My MF dealer had a Monroe Tufline 6' with hydraulic scarifiers on the lot. I'm not sure of the particular model but it was very heavy and appeared to be well built.
My MF dealer had a Monroe Tufline 6' with hydraulic scarifiers on the lot. I'm not sure of the particular model but it was very heavy and appeared to be well built.
4x4sche
Member
Re: 72\" Box Blade with hydraulic scarifiers (teeth)
The Gearmore hydraulic scraper is made by Cammond. I have a 72" and it works well.
The Gearmore hydraulic scraper is made by Cammond. I have a 72" and it works well.
