6-in-1 bucket (multi-purpose bucket)
- Thread starter VAN1965
- Start date
- Views: 10861
Bought one with my Toolcat about 4 years ago. Couldn't do without it. Have done about everything with it that you could imagine it doing (carrying loads, clearing brush, moving fallen trees, grading, maintaining a long dirt driveway, digging, etc., etc,) and it has never let me down. Along with a mower and forks, I've been able to do everything I need to do on our 40 acres. Excellent implement. Excellent investment.
yellowdogsvc
Platinum Member
4 n 1 is well worth the money. it is an attachment that can save you a lot of labor
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,952
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
These people call this a 6 n 1 for this reason.
6-in-1... The name says it all...
This multi-purpose bucket does it all: dozing, grappling, leveling,
digging, loading, and dumping.
http://www.erskineattachments.com/attachments-catalog/6-in-1-combination-bucket.pdf
6-in-1... The name says it all...
This multi-purpose bucket does it all: dozing, grappling, leveling,
digging, loading, and dumping.
http://www.erskineattachments.com/attachments-catalog/6-in-1-combination-bucket.pdf
radman1
Elite Member
- Joined
- Jul 8, 2006
- Messages
- 3,016
- Location
- midwest
- Tractor
- JD 4520, Toolcat 5610, Bobcat S300, Case-IH 125 Pro, Case-IH 245, IH 1086, IH 806
The correct answer is - "It depends". I have a 4in1 on my compact wheel loader but also have grapple bucket and tooth buckets. Also have a TC with lots of attachments.
Dozer blades on smaller machines, work well with loose material or fairly limited grading. It takes weight, traction and stable wheel base to handle a dozer blade well. The TC does not have those qualities. A true dozer does. My 13K lb wheel loader is not great. A large frame, tracked skid steer will do better but still can be difficult to manage with a dozer blade. Most guys can grade better with a bucket on a skid steer rather than using a dozer blade. Much easier to use a box blade with scarifers compared to a dozer blade on a TC for grading or loosening material.
The grapple of a 4in1 cannot carry near the material of a true grapple. It just does not have the grabbing capacity and can't hold on to material as well.
The extra weight of a 4in1 grapple also can have significant negative effect on lifting capacity.
If you have limited use for a grapple, or dozer blade, and don't mind the decrease in lifting capacity, then a 4in1 can be very handy. I would be careful with a dozer blade on a TC. Digging with just the corner of a dozer blade could be a little hard on the central boom of the TC.
The only reason I have a 4in1 was because I found it cheap. It is over 2000 lbs, 100" wide and was never used but was several years old. Paid $1500 for it.
Dozer blades on smaller machines, work well with loose material or fairly limited grading. It takes weight, traction and stable wheel base to handle a dozer blade well. The TC does not have those qualities. A true dozer does. My 13K lb wheel loader is not great. A large frame, tracked skid steer will do better but still can be difficult to manage with a dozer blade. Most guys can grade better with a bucket on a skid steer rather than using a dozer blade. Much easier to use a box blade with scarifers compared to a dozer blade on a TC for grading or loosening material.
The grapple of a 4in1 cannot carry near the material of a true grapple. It just does not have the grabbing capacity and can't hold on to material as well.
The extra weight of a 4in1 grapple also can have significant negative effect on lifting capacity.
If you have limited use for a grapple, or dozer blade, and don't mind the decrease in lifting capacity, then a 4in1 can be very handy. I would be careful with a dozer blade on a TC. Digging with just the corner of a dozer blade could be a little hard on the central boom of the TC.
The only reason I have a 4in1 was because I found it cheap. It is over 2000 lbs, 100" wide and was never used but was several years old. Paid $1500 for it.