54" mower deck

[groundchuck]

Looking for helping, I've scoured the internet without much luck. Looking for spindle shields for a 54" mower deck from a 97 345
I believe it's a 54c deck. Any help is much appreciated

 

[beenthere]

gc
Is this the part you want? part # 157142
John Deere Deflector Shield - M157142

 

[groundchuck]

gc
Is this the part you want? part # 157142
John Deere Deflector Shield - M157142

not quite, i believe its a metal piece for the left and right side of the deck that shields it from debris getting in there.

 

[beenthere]

If you mean the top covers over the spindles, then you can get them through your Dealer. part # shown for the RH side.
I leave these shields off my decks, because then I can blow them dry after every mowing so moisture doesn't collect in that debris that gets under the shields and causes rust.
But you need to know if a 54" or a 54C deck.

 

[groundchuck]

If you mean the top covers over the spindles, then you can get them through your Dealer. part # shown for the RH side.
I leave these shields off my decks, because then I can blow them dry after every mowing so moisture doesn't collect in that debris that gets under the shields and causes rust.
But you need to know if a 54" or a 54C deck.

that's it, i have a 54C, anychance you can post the link for that image? much appreciated

 

[beenthere]

If you put up the serial number to confirm the model deck, I'll give it a shot.

 

[beenthere]

Waiting for more info.. would like to help.

 

[groundchuck]

Waiting for more info.. would like to help.

Mower deck serial number has been torn off. I believe it to be a 54c on a 345 tractor.

 

[MORRISONSTEEL]

All 345's with a 54" deck are just 54" decks and not the "c" series deck. But it certainly could have been replaced at some time after the fact. Also I do not think that 54c had metal shields, I think they are all plastic imao.

 

[beenthere]

Agree with Morrisonsteel, but thought OP may have a GX345 that has a 54C deck.. He's not been too responsive, so hard to help.
Pics might help too.. as well.

 

[beenthere]

Sent a PM to chuck, and he responded that he has more pressing issues and no time for this one..