Traction 4wd will not engage?

   / 4wd will not engage? #1  

BBmong

New member
Joined
Feb 21, 2012
Messages
1
Location
Hope Valley RI
Tractor
Mahindra 3510
Hello I am new to this site looks like there is a lot of knowlede here. I was wondering if anyone could help? My 3510 new sheetmetal will not engage into 4wd, Is there a simple fix for this that I am missing or is there a common problem with Mahindra. Thanks any help will do!
 
   / 4wd will not engage? #2  
Welcome to TBN.
Have you try rocking the tractor or down pressure w/fel bucket also turn the front tires than engage.
 
   / 4wd will not engage? #3  
The shifting fork for the 4 WD has a tendency to get worn on the 3510 and 4110 models. It is easy to change, especially if you already have the Hyd/Trans fluid drained, like hydraulic oil change time. I keep the fork in stock.
 
   / 4wd will not engage? #4  
Shift fork is common as Galen said, if that is your problem, I would recomend the detent ball, spring, o-ring and gasket to go with the shift fork . But I would first pull the front drive shaft cover(shield) and check the front drive shaft and couplers. I Have seen the snap ring pop out of the groove and coupler slide back and seen a few strip the couplers/drive shaft when someone drives in 4wd on hard ground.
NEW ENGLAND TRACTOR a division of Johnson Automotive Inc.
 

Tractor & Equipment Auctions

2025 Swict 84in Bucket Skid Steer Attachment (A50322)
2025 Swict 84in...
Gooseneck Livestock Stock Trailer - Tandem Axle Ranch Hauler - Selling Absolute, No Reserve (A52128)
Gooseneck...
JOHN DEERE 450H CRAWLER DOZER (A51406)
JOHN DEERE 450H...
Wolverine Quick Attach Utility Hitch Adapter (A50514)
Wolverine Quick...
2019 CATERPILLAR 259D SKID STEER (A51242)
2019 CATERPILLAR...
2014 GENIE GTH-5519 TELESCOPIC FORKLIFT (A51242)
2014 GENIE...
 
Top