48 " Mower Deck Belt Cub Cadet

   / 48 " Mower Deck Belt Cub Cadet #1  

GTSRider

Gold Member
Joined
Jun 26, 2010
Messages
316
Tractor
Cub Cadet 3000
I just did a dumb thing.... and removed by cutting the old
original belt on my 48" deck.... to replace with a new one.
This is a drive shaft deck with ONE continuous belt.
Anyone know where I can see a diagram of this belt placement ?
I should have taken a pic.... but I trusted my memory, and now can
not figure it out.
Thanks ,
Pete
 
   / 48 " Mower Deck Belt Cub Cadet #2  
It wraps around the deck like in this attached picture. This should give you enough info?
 
   / 48 " Mower Deck Belt Cub Cadet
  • Thread Starter
#3  
Yes ...that's it ...thanks !
Looks like I got some work ahead of me....
and need to remove shaft gear box bolts and some bracket bolts as belt must go UNDER brackets.... ugh..... nothing made simple.....
with 10 years of rust I hope they loosen without breaking.
 
   / 48 " Mower Deck Belt Cub Cadet
  • Thread Starter
#4  
All went surprisingly well.
Only shaft mounting bolts need to be removed.
A good thing as there was rust and debris under shaft gearbox.
Cleaned and treated that area with a rust inhibitor, and re- assembled.
Now good for many years to come.
Thanks for your help.
 

Tractor & Equipment Auctions

2021 Ver-Mac PCMS-3812 Solar S/A Towable Trailer Message Board (A49461)
2021 Ver-Mac...
2018 John Deere 8370R MFWD Tractor (A50657)
2018 John Deere...
2014 TOYOTA 8FGCU25 FORKLIFT (A51222)
2014 TOYOTA...
2018 DODGE RAM 2500 (A50854)
2018 DODGE RAM...
Toro 30495 Groundsmaster 7200 72in Zero Turn Mower (A48082)
Toro 30495...
2020 CATERPILLAR 289D3 SKID STEER (A51242)
2020 CATERPILLAR...
 
Top