'48 8N hydro sump

   / '48 8N hydro sump #1  

tderrick

Silver Member
Joined
May 14, 2008
Messages
177
Location
Nashville
Tractor
L3901 , Ford 8N and 640
Needing to change the oil in the hydro sump... There is some leaking around the axle hubs so it looks like someone put in something more like gear oil than hydro oil... Do I need to worry about the yellow metal bit, or am I safe to use a modern type of gear oil?? (think I'll keep with the heavier gear oil-it's worked this long)

thanks as always...
 
   / '48 8N hydro sump #2  
You need to check out the specific oil you want to buy. Some, but not all 80W-90 is yellow metal safe.
 
   / '48 8N hydro sump #3  
ditto what rick said.. and.. yes..that is a gear oil back there.

napa makes a 90wgl1 part number 65-205 for a 5g pail. as rick said.. some people sell a 80w90 gl 4/5 gear oil that is marked yellow metal safe... that's fine to use.

tsc sells an oil that is marked for ford trannies and hyds and diffy from 39-52 under the traveler brand in a black pail with a blue lable.

soundguy
 
   / '48 8N hydro sump
  • Thread Starter
#4  
Thanks, guys...
 

Tractor & Equipment Auctions

2022 DRAGON  130BBL VACUUM TRAILER (A53843)
2022 DRAGON...
2007 JOHN DEERE 7630 TRACTOR (A53843)
2007 JOHN DEERE...
2014 MACK GU713 WATER TRUCK (A51247)
2014 MACK GU713...
Backhoe Bucket (A53117)
Backhoe Bucket...
SET OF (3) ALCOA 24.5 ALUMINUM RIMS (A53843)
SET OF (3) ALCOA...
2013 Kia Soul Hatchback (A51694)
2013 Kia Soul...
 
Top