Danescountry
New member
What oil is used in Trans & Hydraulic lines?
4600 Ford Trans & Hydraulic lines oil
- Thread starter Danescountry
- Start date
- Views: 1397
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
utf fluid meeting m2c134D spec is used int he trans, and the rear/hyds sump.. power steering too.
OP
Danescountry
New member
Thanks. How much does it take?
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
you will have to check your manual on that one.. or fill till the check plugs are happy.
i'd plan for 'quite a bit'
i know my 5000 takes a couple pails plus.
i don't recall what my 4600 took when i serviced it earlier this year.. but i buy utf by the 5g pail.. multiple pails at a time..
it will for SURE take well over 5g
i'd plan for 'quite a bit'
i know my 5000 takes a couple pails plus.
i don't recall what my 4600 took when i serviced it earlier this year.. but i buy utf by the 5g pail.. multiple pails at a time..
it will for SURE take well over 5g
OP
Danescountry
New member
Thought so. Thanks
