Backhoe 445 Hydraulics

   / 445 Hydraulics #1  

BuzzyG

Bronze Member
Joined
Sep 28, 2009
Messages
51
I have replaced the linkage between the crank and the hydraulic pump multiple times. It is operable again, but through my research, I have come up with some questions.

1. Is there a relief valve or check valve on these machines that might be faulty?

2. The linkage from the crank has only about an inch long bite on the spline from the hydraulic pump. Is that enough?

Thanks for the help!! (I wish help with this machine were the only help I need.)
 

Tractor & Equipment Auctions

80in HD Tooth Bucket with Side Cutters ONE PER LOT (A51039)
80in HD Tooth...
2013 POLARIS RANGER 800 EFI UTV (A51243)
2013 POLARIS...
1981 LINK BELT HSP 8028 (A50854)
1981 LINK BELT HSP...
vergenes (A50657)
vergenes (A50657)
1995 CATERPILLAR 621E (A50854)
1995 CATERPILLAR...
2014 COTTRELL CX-09LS2 AUTO HAULER (A51222)
2014 COTTRELL...
 
Top