425 on Order

   / 425 on Order #31  
woodlandfarms said:
Valve stems are my bane. I strongly suggest replacing all of them with metal stems. If a limb hits it right, it can open up the stem, let air out then close back up (rare, but it happens). I have 5 of 8 tire in metal.

Carl
I reversed the valve stems that were on the inside (toward the powertrac) and replaced the outside ones with metal cause i kept pulling them out and jamming limbs into them.
 
   / 425 on Order
  • Thread Starter
#32  
BobRip said:
It's 1 and 13/16 inches. Northern probably has one ($20?). Don't go to Sears or NAPA, over $100.

Thanks! Agree with going to Northern. Their big wrenches were in the $20 range you mentioned. Will pick one up next pay period.
 

Tractor & Equipment Auctions

2017 Nissan Versa SV Sedan (A53424)
2017 Nissan Versa...
2025 FUTURE X-DM43 SKID STEER DISC MULCHER (A58214)
2025 FUTURE X-DM43...
LANDHONOR BS-12-2500G (2) PRONG HAYSPEAR (A57193)
LANDHONOR...
Caterpillar 315C L Hydraulic Excavator (A53421)
Caterpillar 315C L...
2006 INTERNATIONAL 7400 6X4 DUMP TRUCK (A52706)
2006 INTERNATIONAL...
(1) 5' X 4' TRAILER TAILGATE (A57192)
(1) 5' X 4'...
 
Top