4200 no lift w/3 point

   / 4200 no lift w/3 point #1  

craigk

New member
Joined
Dec 27, 2008
Messages
3
I have a 2000 4200 John Deere that I was removing snow with the back blade and the 3 point hitch will not lift. It was working fine until this. I took the 3 point hitch arms off and I can lift the 2 arms that are connected to the rockshaft up and down freely
Thanks for any help
 
   / 4200 no lift w/3 point #2  
Hard to help with an answer with so limited details.
Lift control lever still attached?
What was reason the hitch arms were removed?

Anything else that may have led up to this failure to operate?

Maybe remove the seat and inspect the control lever connections.

Let us know what you find.
 

Attachments

  • 4200_rockshaft.jpg
    4200_rockshaft.jpg
    399.5 KB · Views: 111
  • 4200_rockshaft_hydflow.jpg
    4200_rockshaft_hydflow.jpg
    229.8 KB · Views: 123
  • 4300_rockshaft_control.jpg
    4300_rockshaft_control.jpg
    1,008 KB · Views: 128
Last edited:
   / 4200 no lift w/3 point #3  
Move all the control levers around. One may not be in the correct position.
 
   / 4200 no lift w/3 point #4  
Only one lever that operates the 3pt arms (item D in pic).

Some feedback from the OP will help find the problem.
 

Tractor & Equipment Auctions

New/Unused 7ft 20 Drawer Stainless Steel Workbench (A51573)
New/Unused 7ft 20...
2015 Ford F-550 4x4 Knapheide Service Truck (A51692)
2015 Ford F-550...
Set of Ag R4 Wheels and Tires (A52748)
Set of Ag R4...
Takeuchi Skid Steer (A49461)
Takeuchi Skid...
Selco V5-HD Vertical Hydraulic Baler (A51691)
Selco V5-HD...
2006 GMC C7500 DUMP TRUCK (A51406)
2006 GMC C7500...
 
Top