4110 JD FEL

   / 4110 JD FEL #1  

rloenser

New member
Joined
Jun 14, 2004
Messages
5
Location
New Jersey, Morris County
Tractor
John Deere 4110
Hi again, I used the front end loader for the first time Sat and
put a buldge in the inside top edge within the first ten minutes of use. A rock rolled into FEL and hit inside top edge and bent the bucket. I thought this bucket was made of heavy gauge steal.. ??!!
 
   / 4110 JD FEL #2  
</font><font color="blue" class="small">( Hi again, I used the front end loader for the first time Sat and
put a buldge in the inside top edge within the first ten minutes of use. )</font>

This is a feature. You now have a larger capacity FEL bucket than you had before.

Which bucket do you have?

Cliff
 
   / 4110 JD FEL #4  
I have a 410 FEL but I think my bucket is smaller than yours and its pretty heavy. Never had any problems like that, but then again we don't have any large rocks here on the eastern shore of NC
 
   / 4110 JD FEL #5  
I have the 49" bucket and have beat the beens out of it and have little damage. I would`nt worry about it, I have used mine so often half the bucket is polished steel from all the abrasion.
 
   / 4110 JD FEL #6  
[quote}

This is a feature. You now have a larger capacity FEL bucket than you had before.

)</font>

Thats a riot, I laughed out loud.
 
   / 4110 JD FEL #7  
I have a 410 loader with a 53" bucket, mounted on a 4115. I've had it for two years now. I beat the snot out of it and have only bent the top edge a little. You might have caught a rock the wrong way. If there is such a thing. /forums/images/graemlins/grin.gif

Dave
 
   / 4110 JD FEL #8  
I have a 49" bucket on a 4115 and I also have beat the heck out of it. I have seen it flex a little if I catch a thick root in the center of the bucket and lift with all it has, but it always has popped right back when I released the load. I grew up on a farm using much larger tractor/loader combinations and I have am amazed at how tough this little tractor and loader is!
 
   / 4110 JD FEL #9  
I have the 61" bucket on my 410 loader and haven't had any problems...yet... /forums/images/graemlins/smile.gif
 
   / 4110 JD FEL #10  
...same with me.....same FEL and bucket, no problems...
 

Tractor & Equipment Auctions

2003 Pierce Tilt Cab Pumper Fire Truck (A50323)
2003 Pierce Tilt...
2016 Ford Fusion S Sedan (A50324)
2016 Ford Fusion S...
2003 John Deere 2210 Compact Tractor (RUNS) (A50774)
2003 John Deere...
2705 (A51691)
2705 (A51691)
2013 Ford F-150 (A50120)
2013 Ford F-150...
2018 FORREST RIVER CRUISE LITE CAMPER (A52472)
2018 FORREST RIVER...
 
Top