3930 crankshaft seal

   / 3930 crankshaft seal #1  

Busy_Dad

New member
Joined
May 11, 2022
Messages
4
Location
Weiser, ID
Tractor
BCS 722 and 1953 JD MODEL 40
I currently have the tractor split replacing the clutch. There seemed to be a lot of oil in the housing, and on the back of the fly wheel. I'm thinking it may be the crankshaft seal. How difficult is it to relieve the seal? I just can't seem to find any info on replacing the crankshaft seal. Is it just behind the cover with the 8 screws and 2 from the oil pan?

Thanks
 

Attachments

  • IMG_20250314_100600536.jpg
    IMG_20250314_100600536.jpg
    5.7 MB · Views: 66
   / 3930 crankshaft seal #2  
It is very easy to replace the seal on this engine. Remove the seal housing that is bolted to the block. Look at the crankshaft for a deep groove the seal may have made. If it is very deep you have 2 options. One option is to reposition the new seal so that it is not riding in the same place. Second option is to install a Speedi Sleeve 99472. Search for best price option.
Rear main seal is part # E5NN6701BA. Use old seal to install new seal.
Also, check rear freeze plugs. Yours look to be stainless so you are probably okay, but if not, now is the time to replace them.
 
   / 3930 crankshaft seal #3  

Tractor & Equipment Auctions

2020 CATERPILLAR 259D3 SKID STEER (A51242)
2020 CATERPILLAR...
McKee 504 3pt. Snowblower (A50774)
McKee 504 3pt...
2000 KOMATSU VALMET 860.4 FORWARDER (A51222)
2000 KOMATSU...
2017 PETERBILT 579 TANDEM AXLE SLEEPER (A51222)
2017 PETERBILT 579...
2013 FORD F-550 SUPER DUTY XL BUCKET TRUCK (A51243)
2013 FORD F-550...
2002 STERLING LT9500 DAY CAB (A51222)
2002 STERLING...
 
Top