Aug 26, 2017 / 365 plow off of a 650 tractor #1 S Snojetter New member Joined Jul 13, 2017 Messages 16 Location Brandon, MN Tractor Allis Chalmers, John Deere, M-M Any chance a 365 plow that came off a 650 will fit onto an 855 without modification?
Aug 26, 2017 / 365 plow off of a 650 tractor #2 B beenthere Super Star Member Joined Aug 16, 2001 Messages 18,537 Location Southern Wisconsin, USA Tractor JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold) Possible.. as that blade is for both. The trick may be the attachment is a bit different frame design. So may not be a direct fit. Go to JD Parts John Deere - Parts Catalog and see the two frames listed for the 650 and the 855
Possible.. as that blade is for both. The trick may be the attachment is a bit different frame design. So may not be a direct fit. Go to JD Parts John Deere - Parts Catalog and see the two frames listed for the 650 and the 855
Aug 27, 2017 / 365 plow off of a 650 tractor Thread Starter #3 OP S Snojetter New member Joined Jul 13, 2017 Messages 16 Location Brandon, MN Tractor Allis Chalmers, John Deere, M-M I'm not sure if I'm interpreting the parts diagrams correctly. The tractor frames are obviously different, but it looks like the sub-frame for the plow itself is the same. But I can't tell if there's an adapter specific to each model tractor...
I'm not sure if I'm interpreting the parts diagrams correctly. The tractor frames are obviously different, but it looks like the sub-frame for the plow itself is the same. But I can't tell if there's an adapter specific to each model tractor...
