3515ch

[denjen]

Congrats on the new tractor! I debated about getting more HP or bigger series; but couldn't pass up the deal on the 3515.

 

[ptsg]

Congrats on the new tractor! :thumbsup:

 

[Branson Bob]

All checked out; also getting 3rd function ($800) and bolt on cutting edge ($12). Hope the pic uploads, probably take delivery next week. Thanks again!View attachment 633615

Congratulations! This makes for a very Merry Christmas!

 

[denjen]

Thanks, and just noticed my typo, the cost for adding the bolt on cutting edge was $120 and not $12.... I wish.... LOL

 

[LouNY]

Be carefull if you use your bucket before the bolt on edge is installed,
when I got mine I knew it needed one and I said I'll get it ordered.
Well I actually tweaked the bucket bottom before I got it ordered.

 

[denjen]

Yup, agree and tractor will be delivered with it installed; otherwise I might procrastinate...

 

[denjen]

Quick question regarding 3515ch weight. I pointed out to the dealer when I bought the tractor that the weight for the cab / non-cab showed the same around 3,014 lbs and he said that was bare axle weight w/o tires or cab. Anybody venture a guess the weight with tires/cab? Oh, I picked up a tarter tiller that was used; but not worked. I was reading posts about people putting in spacers in the rears to help stability and I am thinking of putting fluid in the rears. Thoughts on spacers/fluid for the 15 series would be appreciated if either/both would be worth it. Thanks!

 

[K5lwq]

I did load my tires. As far as spacers, I don't need them as I can still adjust width if needed. There may be adjustments left in yours as well.

As far as weight, I would like to know for certain as well. But rough math puts it somewhere around 5000lbs with tires loaded and FEL.

 

[denjen]

Thought I would post couple pics. 1st one is my Dad tilling the garden area and 2nd is me moving a bale that was left in the barn when we bought the property and no, I didn't have bale spear; but it worked strapping it down.