.

[Derrickl112]

.

 

[nybirdman]

Some one just had a listing here for factory made FEL mounted plows....check the snow removal forum.I think Curtis and Meyers and maybe Boss were listed,the first two for sure.
Also check out Everythingattachments.com

 

[Coyote machine]

This is what I have. It is not a truck plow conversion, those don't protect your loader. HLA Snow

 

[Katahdin]

Here's the recent thread that listed a bunch of Quick Attach plows: http://www.tractorbynet.com/forums/owning-operating/323198-front-snowplow.html

 

[Ford850]

Here's another recent thread about FEL plows with some suggested brands.
http://www.tractorbynet.com/forums/attachments/322974-fel-snow-blades.html?highlight=

 

[Rustyiron]

I have a "Snow Wolf" 102". Built tough, It has withstood many hours of plowing in front of a 10,000# skid steer.
Skid Steer Plows, Skid Steer Snow Tires, Snow Pushers | SnowWolf Plows

 

[DK35vince]

This is what I have. It is not a truck plow conversion, those don't protect your loader.

Not sure what you mean.
If the truck plow conversion has trip springs and a cross over relief valve, same as the HLA. Then what's the difference ?

 

[Coyote machine]

Do any of them include lateral float?

 

[MarkE]

I have a "Snow Wolf" 102". Built tough, It has withstood many hours of plowing in front of a 10,000# skid steer.
Skid Steer Plows, Skid Steer Snow Tires, Snow Pushers | SnowWolf Plows

I have the Snow Wolf Ultra 108 and it works great. I bought it in 2011 used on CraigsList for about $2,500. A contractor had it and put some wear on it, but it works fine.

 

[Rustyiron]

The SnowWolf provides for lateral float, but I have made many p.u. conversions out of Fisher's and it does not seem to bother anything other than a clean scrape in come conditions. Usually, the worn out pins will allow some float.:laughing:
Those Horst welding units, esp the large one's with the hyd. tips/ends are very slick for the commercial contractors.