3-Point Hitch 3 way hitch

[farm23]

Many of you have put 2" receivers on the back of your PT's. I would like to do that in the future but here was a quick and easy way for now. The biggest problem I have had is to keep the nut tight enough so the hitch does not rotate. I have just used some locktite and it seems to be working.

The hitch was from Cabela's #52-0920

One advantage with this arrangement is I can still use my small trailer in the bottom hole of the PT.

 

[J_J]

Many of you have put 2" receivers on the back of your PT's. I would like to do that in the future but here was a quick and easy way for now. The biggest problem I have had is to keep the nut tight enough so the hitch does not rotate. I have just used some locktite and it seems to be working.

The hitch was from Cabela's #52-0920

One advantage with this arrangement is I can still use my small trailer in the bottom hole of the PT.

This is what Fourteen did.

http://www.tractorbynet.com/forums/...2-pt-425-pros-cons-395003-e-trailer-hitch-tbn

 

[J_J]

Many of you have put 2" receivers on the back of your PT's. I would like to do that in the future but here was a quick and easy way for now. The biggest problem I have had is to keep the nut tight enough so the hitch does not rotate. I have just used some locktite and it seems to be working.

The hitch was from Cabela's #52-0920

One advantage with this arrangement is I can still use my small trailer in the bottom hole of the PT.

This is Fourteens arrangement.

http://www.tractorbynet.com/forums/...2-pt-425-pros-cons-395003-e-trailer-hitch-tbn

 

[SpringHollow]

http://www.tractorbynet.com/forums/power-trac/99650-rear-hitch-tie-down-hooks.html

That's my setup - kind of nice because of the 2" receiver.

Ken

 

[farm23]

Thanks JJ & Ken. I had not seen thoses two threads. The past threads are a great source of information. Ken I am going to copy your idea of the hooks on the front and back when I have some work done on my tralier.