3-pt Hitch Adaptor for Trailer

SacandagaBrad · Apr 3, 2004

I bought mine from Bad River. Unit was $90, plus about $8 for shipping and you will also need a standard Cat 1 drawbar to bolt it to, about $20. It comes with hardware to keep it from popping up as well, which is important if you are moving heavy loads on uneven ground since the 3PH has no down pressure.

Well built and between your other two options for $$.

Bad River

Just thought I'd point it out FYI. I also use mine with a carry all that is very handy.

Brad

MadReferee · Apr 3, 2004

I just built one for myself and it cost me $25, $10 for a 2" receiver and $12 for a cat 1 drawbar and $3 for some hardware. The rest of the steel came from the scrap box. It sorta looks like the Bad River one.

grandad · Apr 5, 2004

I have a Bad River hitch also. Good quality unit.

OkieG · Apr 6, 2004

<font color="blue"> It comes with hardware to keep it from popping up as well, which is important if you are moving heavy loads on uneven ground since the 3PH has no down pressure.
</font>...I agree...important for any load that can't manintain positive tongue weight. Loads of all weights have popped up on me, but not since adding a restraining chain. It attaches to the "swinging" draw bar and to the hitch frame. Similar to the way BadRiver does it, I think.