Got a MF-240 with 3 cyl Perkins diesel. About a year ago I replaced seals on throttle and shut off shafts now have a new leak. Its dripping fuel off what I think is a banjo bolt on bottom of pump onto oil filter below it. Thought it was coming from inspection cover to the left but after cleaning it up a bit can see it leaking above the banjo bolt, or what I think is banjo bolt. Have read they use copper and soft iron crush washers, anyone know which it is? Figured I would try and replace them first.
3 cyl Perkins Fuel Leak
- Thread starter Sam in TN
- Start date
- Views: 2053
thepumpguysc
Elite Member
Yes, they’re Teflon washers..
I always send back more washers than people need, incase they drop some or find someone in need..
U can either wait for someone to chime in or u can send me your address in a private message & I’ll send u some..(free)
I always send back more washers than people need, incase they drop some or find someone in need..
U can either wait for someone to chime in or u can send me your address in a private message & I’ll send u some..(free)
Thank you! Sending PM now
thepumpguysc
Elite Member
Washers sent..
Richard
Elite Member
- Joined
- Apr 6, 2000
- Messages
- 4,999
- Location
- Knoxville, TN
- Tractor
- International 1066 Full sized JCB Loader/Backhoe and a John Deere 430 to mow with
Gotta love this place! 
Thank you sir! Got them in the mail yesterday, ill get them put on this weekend
thepumpguysc
Elite Member
Kool.. 1 goes on each side of the line..& gets TORQUED TO 25ftlbs..