2816 4wd Mahindra

[jmonkMahindra]

all the specifications that I have found on my tractor does not mention anything about operating a roto tiller, is there a roto tiller for this tractor, or will it not run one, if any one who has this size tractor and is running a roto tiller, let me know. Thanks for your help.

 

[s78wingrider]

I"m thinking it will handle a 5' one. Brand will tell how much HP is needed. Aaron

 

[Sergei]

I"m thinking it will handle a 5' one. Brand will tell how much HP is needed. Aaron

I would think your going to probably want a tiller with at least a width of 62 inches as the tractor rear tires has a width of 59 inches and a tiller that size has a working width of 59 inches and needs between 22hp to 45hp, but this may change depending on the brand you buy.

 

[MtnViewRanch]

I have a 3215HST and run a CCM MR-160. It tills 58" wide. I feel like my 3215 could handle a 72" wide tiller with no problem in our soil, but for where I till, I need the narrower width. I do not notice any tire tracks left behind with my 58" tiller. I think that your tractor could handle either a 60' or a 66" without any problems.

Good luck and let us know what you get and how you like it.

 

[George2615]

Tractor Supply sells tillers that will work on your tractor.

CountyLine Tiller, 60 in. - 2127109 | Tractor Supply Company

 

[kymedic69]

I have a 2816 4x4 and use a Woods 60" rototiller. Works great, what took me hours with a handle tiller gets done in about 20 min. The soil feels like dust after running it through 1 time.

 

[edg2508]

I bought a 60" KingKutterII this spring for my 2816. It handled it just fine and made short work of the garden even with our clay base soil.