2720 question

[wooden]

Question for anyone who has access to JDparts. I For some reason , because of where I live,I am not allowed to access the parts site, because I am in the Virgin Islands and there are no official dealers here. I need someone with acceess to look up part # lva803201 and find out if, and how many, they have in stock. I can only look up part numbers from here.

Thanks to anyone that can help!!

Wooden

 

[megotatractor]

Looks like they updated jdparts this weekend, you might want to try it again later. The site doesn't allow me to search other dealers.

 

[wooden]

Won't make any difference trying again later. I went round and round with the JD site people, and where I live is the problem. I am going to re register using my sisters address in Virginia to see if that helps, meanwhile all I need is for someone to tell me if they have the part in stock at JD and how many if possible. This is a factory defect so they sold all that they had. Seems I am not alone with this problem.

Wooden

 

[glc24]

I need someone with acceess to look up part # lva803201 and find out if, and how many, they have in stock.

Hi Wooden,
You have to go through a JD dealer,or someone who deals in JD parts. When I check on a JD part through the JD parts website,it is through the dealer I chose to deal with when I set up the site.
You can also check part numbers with the online JD dealers.
It is a high pressure pipe,correct?
Price is 310.00 US dollars.
My dealer,along with a few others,show "no stock".

Greg

 

[wooden]

WOOWWW!!!!! $310 for a piece of tubing with two end fittings welded on to it??? that tube is no more than 3/8"X 5feet !! OK lets say it's the special bends in it then!! Had it not split right in the bend I would be using a piece of high pressure hose with the two end fittings and hose clamps. My dealer will be paying for it but I can see what I am in for down the road!!

Thanks for the info Greg!!You're a good man

Wooden

 

[RoyJackson]

This is a factory defect so they sold all that they had. Seems I am not alone with this problem.

Wooden

If it's a factory defect, it should be covered by warranty.

 

[wooden]

If it's a factory defect, it should be covered by warranty.

The only way I see it is as a factory defect. What else could cause this line to split like it did on a brand spanking new 2720? This pipe is not in a location where it could be bumped by outside objects, Its broken under the seat at the bend where the banjo fitting is attached to the selective valve.

Wooden

 

[Glen Watkins]

It would be interesting to know if JD covers this. Please keep us informed!

 

[wooden]

As soon as this is resolved I will post the result. I have been without my machine for more than a month now and no one can tell me when JD will get this part. That's why I asked for help looking on the site to know when they get the new parts in. Maybe you can check in on it for me every few days since I can't access the site. would be a big help !!

Wooden

 

[Glen Watkins]

Can you get back up and running if you have a rubber line made up?
Looks like banjo fittings so probably can not substitute with rubber. I checked in jd parts and there is none available at any of my local dealers. Wonder if you can get one custom made.

Ever get over to Jost Van Dyke and Sydney’s Peace and Love?