2615 HST pedal adjustment

[kenboat]

Could someone post the adjustment procedure for the HST foot pedal ? Our tractor wants to creep in reverse when you dont have your foot on the pedal.

Thanks, Ken

 

[AchingBack]

This was previously posted for the 2015 HST. It should be similar to the 2615 hst

http://www.tractorbynet.com/forums/...2015-hydrostatic-transmission-creeps-hst4.jpg http://www.tractorbynet.com/forums/...2015-hydrostatic-transmission-creeps-hst3.jpg http://www.tractorbynet.com/forums/...2015-hydrostatic-transmission-creeps-hst5.jpg

 

[kenboat]

My 2615 HST is different. I had seen that post when i searched around.

Thanks, Ken

 

[2TonCommon]

My 2615 HST is different. I had seen that post when i searched around.

Thanks, Ken

Mine too, and it creeps. It started when ther was only about 6 hours on the machine.

There's a small piston (probably pneumatic) on the R/H side of the gear box with linkage going to the HST pedals. The piston (about 2" dia.) has shafts on both sides and it all links to a large shaft going into the gearbox.

The ONLY possible adjustment I see is a 12mm nut on the forward piston shaft, but I have not taken any reference measurements yet to get this back where it came from in case any adjustments I make FUBAR the HST response.

Right now, the creep is slight but annoying in both FWD and REV. I'll report back if I'm able to diagnose and fix it..

 

[George2615]

Here's the adjustment for your pedal. Open the jpeg file with paint and enlarge if you need to. I also attached it as a doc file.

 

[2TonCommon]

George: You are the MAN!!!! Thank you. :thumbsup:

 

[LAWALLSTRACTOR]

You are the man, George. I have been using computers in my business since 1986 and today I can't get pictures like that on TBN. I have had people try to show me, but if I can't physically get my hands on it I can't seem to do it. I envy you computer people.

 

[George2615]

You are the man, George. I have been using computers in my business since 1986 and today I can't get pictures like that on TBN. I have had people try to show me, but if I can't physically get my hands on it I can't seem to do it. I envy you computer people.

I'm not that great of a computer guy. I know just enough to get by. I wish I was more computer savvy then I'd be able to find out why it takes my computer so long to boot up.
I do know how to scan a page on my combination printer, scanner, copier, from a book or picture and save it as a file which is all I did.

 

[diggerman47]

if I can't physically get my hands on it I can't seem to do it. I envy you computer people.

Computers I get. I envy you TRACTOR people. <g>

 

[kenboat]

Ok George, I will say it to, YOU ARE THE MAN.

We have the tractor inside and going to get it adjusted. I have a small boat shop and we move the boats around with the tractor. It makes it a bit of a pain when it wants to creep back.

Thanks again George, and everyone else. Ken