25 series - will it fit in shed????????

[cjlink]

This is a weird question, but I sure hope that one of you guys can answer this for me. My tractor is at a different location (100 miles away), and I am planning a shed at another location.

I have a E350di (which is just like the 3325) with the upright exhaust pipe. Does anyone know the height of the muffler? Would this fit in a 10' tall shed or should I look at going with a 12'?

 

[Sam V]

I have a 3525 and it would need an awful tall stack not to fit in a ten foot shed. I would easily say you have no problems there. I think the stack on the 3325 is no more than1 foot taller than the 3525 air breather. You would fit well under an 8'door.

 

[cjlink]

Thanks for replying. I have attached a picture of the E350. The manual states that the tractor is 63" tall from the ground to the top of the steering wheel.

I am going to be moving the tractor soon from it's current location to my new location. I don't really have the room or $$ for a huge structure, so I am planning on building a 14'x16'x10' pole barn/shed to park the tractor in.

Do you think that would be bigger enough (I'll lower the ROPS while in shed)?

Thanks

 

[Sam V]

I just measured my 3525 to the top of the ROPS and it is about 7 1/2 ft. You got lots of room and if you have an 8 ft door you won't have to lower the ROPS

 

[cjlink]

Sam

Thanks so much for your help. You just saved me from having to drive 3 hours to take a measurement.

 

[Sam V]

Glad to help. Good luck on the project