3-Point Hitch 2320 3 point hitch problem

   / 2320 3 point hitch problem #11  
Victory Pete said:
Thanks guys for your concerns. I am very safety conscious, I have the 54" plow on the front and lowered. It makes the operation very stable.

VP

Still needs jack stands. Your jack could fail.

I had a friend working under his Kenworth twin screw truck. One axle had both wheels off and he had a bottle jack on each side. One jack failed and he was crushed to death.
 
   / 2320 3 point hitch problem
  • Thread Starter
#12  
Still needs jack stands. Your jack could fail.

I had a friend working under his Kenworth twin screw truck. One axle had both wheels off and he had a bottle jack on each side. One jack failed and he was crushed to death.

Thanks for the advice, I have jack stands, didnt deem them neccessary as I was just pulling the wheels so I could access the 3 point hitch support pin. If the jack failed the rear of the tractor would have dropped and I would have been out of harms way.
Thanks
VP
 

Tractor & Equipment Auctions

P&H OMEGA 20-20 (A50854)
P&H OMEGA 20-20...
2010 L3 GENERATOR SET (A51222)
2010 L3 GENERATOR...
2015 DODGE RAM 1500 CREW CAB TRUCK (A51406)
2015 DODGE RAM...
2019 VOLVO VHD84F300 TRI-AXLE DUMP TRUCK (A51222)
2019 VOLVO...
2020 INTERNATIONAL LONESTAR TANDEM AXLE SLEEPER (A51222)
2020 INTERNATIONAL...
2020 JLG 1732 16,755lb 4x4 High-Capacity Rough Terrain Telehandler (A49461)
2020 JLG 1732...
 
Top