Loader 2210BD adding a loader

[Samtj]

I'm getting ready to add a loader to my 2210bd and needs to know the flow rate of the hydraulic pump. I saw the list of specs by scotty but the pump info for my model is not there. I have a Bush Hog 2240qt loader and need to know what size (gpm) control valve would be correct for the pair. Any info greatly appreciated.

 

[kenmac]

I'm getting ready to add a loader to my 2210bd and needs to know the flow rate of the hydraulic pump. I saw the list of specs by scotty but the pump info for my model is not there. I have a Bush Hog 2240qt loader and need to know what size (gpm) control valve would be correct for the pair. Any info greatly appreciated.

It's probably going to depend on the RPM. I know the 3110 I use to own had a very slow response at low RPM.

Give Fredricks ,or Hoye a call. they are the yanmar experts, and may be able to tell you the flow @xxx RPM
It isn't going to be a lot but I can't remember

 

[winston1]

I believe the standard pump is about 4.4 gpm wide open. LOADER VALVE - JOYSTICK STYLE: Yanmar Tractor Parts

 

[Samtj]

Thanks for that info. That's what I needed.