Anonymous Poster
Epic Contributor
- Joined
- Sep 27, 2005
- Messages
- 29,678
Do I have to remove the hood/grille guard for my loader to mount a 54in front blade or will it work with it on?
2210 w/ hood gaurd
- Thread starter Anonymous Poster
- Start date
- Views: 716
JDGREEN4ME
Veteran Member
- Joined
- Sep 27, 2002
- Messages
- 2,242
- Location
- Southeast PA
- Tractor
- John Deere 2520, John Deere X534, GT 225, GT 275
I have a 4110 so it might not be the same...but...I do not need to remove hood guard to attach my front blade...
bigpete
Veteran Member
You do not need to remove the hood guard to use the quick-tatch bracket for the front blade.
When you first install ithe quick-tatch bracket you will need to loosen the bolts that mount the hood guard to the frame, then slip the quick-tatch bracket inside and drop the spring latch pin through the holes after they are oriented. You only need to do this the first time you install it.
When you first install ithe quick-tatch bracket you will need to loosen the bolts that mount the hood guard to the frame, then slip the quick-tatch bracket inside and drop the spring latch pin through the holes after they are oriented. You only need to do this the first time you install it.