OP
RalphVa
Super Member
- Joined
- Dec 19, 2003
- Messages
- 7,901
- Location
- Charlottesville, VA, USA
- Tractor
- JD 2025R, previously Gravely 5650 & JD 4010 & JD 1025R
Think I've figured out what to do about the top link with the QH. Will post photos under new topic if it works.
e.g. think I can use the top link connected to the top of the QH to go directly to the top link pin on the bush hog (and other implements, too) by just running the top link through the QH top link pin area (without pin) and directly pin to the top of the implement.
e.g. think I can use the top link connected to the top of the QH to go directly to the top link pin on the bush hog (and other implements, too) by just running the top link through the QH top link pin area (without pin) and directly pin to the top of the implement.
