Just purchased a new NX5010 and the unit would intermittently blow the 15 amp fuse for the PTO/4 wheel drive circuit. PTO and 4 wheel drive would obviously not work then.
Solution is the unit had a defective diode near the PTO solenoid, The solenoid is on the right side of tractor just behind the Hydro filter. Wrapped up in black tape on the wiring harness is a small rectangular diode say 1/4 inch wide by 3/4 inch long. Dealer replaced the diode and so far it appears to be working good.
Solution is the unit had a defective diode near the PTO solenoid, The solenoid is on the right side of tractor just behind the Hydro filter. Wrapped up in black tape on the wiring harness is a small rectangular diode say 1/4 inch wide by 3/4 inch long. Dealer replaced the diode and so far it appears to be working good.