It does in viscosity but differs in other qualities, foaming, wear, etc.does AW32 equate to 10wt?
He's probably referring to his shop compressor? that's what mine takesI know about the injection pump now. Next question is: What compressor?
None..yet anywayI take it you haven't had any problems with it.
He's probably referring to his shop compressor? that's what mine takes
You still have regular AF listed, not diesel. I could be wrong but I think these are wet sleeve engines, by not using Diesel AF you could end up pitting the liners eventually.....Mike
I haven't found anyone that knows what I'm talking about and the manual that came with my jinma (actually in english and from the actual American dealer) says to use regular anti-freeze.
My manual -- apparently translated from the Chinese by Google translate -- says to use clean creek water and drain it when below freezing temperatures are expected. No kidding.
My understanding is that while some Chinese diesels are wet sleeve, the Jinmas are not. I use regular anti-freeze.
When you do the injection pump fluid change – remove fill cap and both drain plugs. Measure the amount it takes to refill. I think that you will find it is ~16oz.
Hey, no problem at all. I thought they were wet sleeve for some reason so I learned something myselfI'm pretty sure this is accurate (sorry Mike).