2006 TOOLCAT 5600 HIGH FLOW ISSUE

   / 2006 TOOLCAT 5600 HIGH FLOW ISSUE #1  

poky1234

New member
Joined
Dec 21, 2014
Messages
1
Location
Toronto, Ontario
Tractor
Ford 3910
Hello, Need some advice on my Toolcat. I bought the machine a year ago and the previous owner told me the controller/ dash was replaced.
I had never used the High Flow function in a year. Last week I tried and nothing happened. Switch does not lightr up. Took it to a dealer and they say it needs a new controller/dash again ! Is there anything else I could check before I spend $1600. ? I read the controller can be programed to turn high flow on and off. Any suggestions would be appreciated.

Thanks
 
   / 2006 TOOLCAT 5600 HIGH FLOW ISSUE #2  
In the control panel set-up section of the operator's manual, I can lock out the 2-speed, high flow, horsepower mngmt, and tire size selection.
 

Tractor & Equipment Auctions

1838 (A51248)
1838 (A51248)
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
DROME EXCAVATOR SLIDE ATTEHMENT (A50322)
DROME EXCAVATOR...
2009 40ft High Cube Refrigerated Storage Container (A51692)
2009 40ft High...
70pc 12ft.x 3ft. White Metal Roof Panels (A53424)
70pc 12ft.x 3ft...
2018 Ford Transit 350HD Handicapped Van (A55788)
2018 Ford Transit...
 
Top