Zork
Platinum Member
- Joined
- Dec 14, 2003
- Messages
- 978
- Location
- Virginia
- Tractor
- '04 Branson 3520, '51 Fergy, '96 MTD 18/46, '02 Craftsman GT5000/48
Does anyone know what size sight glass we have and whether it is threaded or pressed in. Mine might be leaking and I would like a spare or two before I touch it.
I tried measuring it today at 1.173", but I couldn't get real close to say it was accurate. The screw in versions are about $10 for three units. This type has no hex head and is flush with the axle.
Thanks for any replies.
I tried measuring it today at 1.173", but I couldn't get real close to say it was accurate. The screw in versions are about $10 for three units. This type has no hex head and is flush with the axle.
Thanks for any replies.