jmarotz
Member
Had a 20 year old ATV snow plow( 60 inches wide) that I though may work better on my BX than on my ATV.
All the brackets were bent so I took them off and built new ones using heavier material than the original.
Mounted the lift control on the joy stick.
Now inorder to hook on or off I just remove one bolt from the frame, undo one electrical plug and undo one quick link.(about one minute)
Cost of material including paint was about $35.00.
Don't have any snow for testing so I put the top bolt in the blade tip back and went to work moving dirt and let me tell you IT WILL MOVE A LOT OF DIRT IN A VERY SHORT TIME.
All the brackets were bent so I took them off and built new ones using heavier material than the original.
Mounted the lift control on the joy stick.
Now inorder to hook on or off I just remove one bolt from the frame, undo one electrical plug and undo one quick link.(about one minute)
Cost of material including paint was about $35.00.
Don't have any snow for testing so I put the top bolt in the blade tip back and went to work moving dirt and let me tell you IT WILL MOVE A LOT OF DIRT IN A VERY SHORT TIME.
