1999 Massey Ferguson 1240 engine parts

[Dying_-2-_Live]

I have a 1999 Massey 1240 with an iseki 1.464L 3 cylinder with 2200 hours. I bought it at an auction with "low compression" in 2 cylinders. Well my compression reading were 360, 250, 160. Leak down test resulted in audible air coming through the bottom end on the first 2 cylinders. I did not bother leak down testing the back cylinder. I cannot locate piston, rings, sleeves or anything online. I don't want to pull the head yet until I know I can locate a gasket. Does anyone know where I could obtain these parts? Also any other reason why air would reach the oil pan from the injector holes?

 

[can do]

I have a 1999 Massey 1240 with an iseki 1.464L 3 cylinder with 2200 hours. I bought it at an auction with "low compression" in 2 cylinders. Well my compression reading were 360, 250, 160. Leak down test resulted in audible air coming through the bottom end on the first 2 cylinders. I did not bother leak down testing the back cylinder. I cannot locate piston, rings, sleeves or anything online. I don't want to pull the head yet until I know I can locate a gasket. Does anyone know where I could obtain these parts? Also any other reason why air would reach the oil pan from the injector holes?

Have You tried the Iseki site on TBN ? These engines where made for several manufactures AGCO,Bolens,Challenger,Iseki, &M-F to name a few ! I did Google a 1999 M-F 1240 to see how many where produced & was not able to get a figure but I did get a dozen part suppliers . I think You need to expand your search & don't limit to a M-F 1240 You might have more success fingers X , Even if I couldn't find a production no. on that specific year & model I'm sure several thousands of these engine where produced as a whole ,As I said broaden your search & good luck & welcome to TBN.Also Iseki has been around since 1920 they started out making implements.