1995 toro wheel horse with a vanguard engine

   / 1995 toro wheel horse with a vanguard engine #1  

Chette

New member
Joined
Jun 11, 2017
Messages
2
Location
Madison Heights, Va
Tractor
Toror Wheel horse Lawn Tractor 28Q777-01608 Briggs and Stratton Vanguard Engine
I am rebuilding a Briggs and Stratton Vanguard 15.5hp 28Q777-016801 Engine.

In the sump engine case there is an oil seal which needs replacing.

How do I get the old oil seal out and the new one in?

here is the picture of the seal bottom out side of the sump case that attaches to the crank case
WIN_20170611_13_44_16_Pro.jpg

please respond here or email me ASAP.

Chette
 
   / 1995 toro wheel horse with a vanguard engine #2  
Does it look like you can you punch it out from the other side?
 
   / 1995 toro wheel horse with a vanguard engine #3  
There are a number of youtube videos showing ways to remove oil seals.
 
   / 1995 toro wheel horse with a vanguard engine
  • Thread Starter
#4  
   / 1995 toro wheel horse with a vanguard engine #5  
With the sump off you could probably just pry it out with small bar. When they are assembled, you can pop a small hole in the edge with an awl- then turn in a sheet metal screw and 1) pry it out via the screw or 2) let the screw bottom on the pan boss and push it out that way.
 

Tractor & Equipment Auctions

2008 FORD F450 SERVICE TRUCK (A54607)
2008 FORD F450...
2025 K2030 UNUSED Metal Garage (A53117)
2025 K2030 UNUSED...
2018 MACK CHU613 PINNACLE DAY CAB (A53843)
2018 MACK CHU613...
2008 Ford F-250 Crew Cab Pickup Truck (A51692)
2008 Ford F-250...
2019 FREIGHTLINER SPRINTER 2500 CARGO VAN (A54313)
2019 FREIGHTLINER...
1261 (A50490)
1261 (A50490)
 
Top