1990 Ford 1720 4wd Knuckle seal

   / 1990 Ford 1720 4wd Knuckle seal #1  

John Knoble

New member
Joined
Jun 7, 2019
Messages
11
Location
Antelope Acres Ca
Tractor
1990 Ford 1720
Hi All!

I just received my lower knuckle seal from Messick's.

Looking for easier way to remove the seal from the housing so i don't muck up the casting where it's housed.

I found a socket that will be used to replace the seal and hoping to use my 20 ton press to install it.

Have a HF seal puller but guessing it's gonna take a little more than $10 puller.



Thank you and stay safe!:)
 
   / 1990 Ford 1720 4wd Knuckle seal #2  
Shouldn't take much more than that. I changed dozens and dozens of steering swivel seals on everything from a 1210 to a 2120 and never used anything more than a seal puller or rolling head pry bar to jerk the seal out.
 
   / 1990 Ford 1720 4wd Knuckle seal
  • Thread Starter
#3  
Thanks RickB,gonna give it **** with HF puller then.:thumbsup:
 

Tractor & Equipment Auctions

9202 (A50322)
9202 (A50322)
BUSH HOG 7007 LOT NUMBER 116 (A53084)
BUSH HOG 7007 LOT...
2005 INTERNATIONAL 4300 24FT BOX TRUCK WITH TRANSLUCENT ROOF (A52577)
2005 INTERNATIONAL...
J and L Cargo Express Shadowmaster Enclosed Trailer (A53472)
J and L Cargo...
2025 20ft. G70 Cargo Transport Chain (A51692)
2025 20ft. G70...
2015 Redi Haul Tilt Deck Equipment Trailer  (A52384)
2015 Redi Haul...
 
Top