1986 Belarus250as Tractor

/ 1986 Belarus250as Tractor #1  

lawandorder39

New member
Joined
Aug 26, 2012
Messages
23
Location
Callahan, Fl 32011
Tractor
John Deere 4710
Tractor stopped moving, not the clutch just had it replaced recently. Does anyone know of repair shop in Jacksonville, Fl that works on German Belarus tractors? Please help. :confused:
 
/ 1986 Belarus250as Tractor #2  
Is your I or II lever pop out to neutral we have one when u put it in a hard pull it will sometimes pop out the lever still shows its in gear but is really not shift to neutral then back to I or II
 
/ 1986 Belarus250as Tractor #4  
Check the range selector lever if it has one. If it's in between high and low, it will act like it's in neutral. Not sure but I thought those had dual range.
 
/ 1986 Belarus250as Tractor #5  
You have two shift levers A foward and reverse lever (shuttle) and then a gear shift lever. At the top of the grid you have I and II this is high and low positons
 
/ 1986 Belarus250as Tractor
  • Thread Starter
#6  
I just went outside and tried what you suggested but it still want move forward or reverse. What else could it be?
 
 
Top