1635 PTO issue

EricMF1635 · May 25, 2020

Was bush hogging today and my PTO stopped turning. Check level to make sure it didn稚 get knock to neutral but it痴 fine. Any ideas?

ptsg · May 25, 2020

According to TractorData, you have electro-hydraulic PTO.

Basically, you select the PTO gear you want and flip a switch to turn it on. What happens a lot during bushhogging is that sticks, heavier brush and whatever can pull the wires under the tractor and cause all sorts of problems.

You may want to give a closer look under the tractor for any pulled wires. Also check the fuses.

EricMF1635 · May 25, 2020

ptsg said:
According to TractorData, you have electro-hydraulic PTO.

Basically, you select the PTO gear you want and flip a switch to turn it on. What happens a lot during bushhogging is that sticks, heavier brush and whatever can pull the wires under the tractor and cause all sorts of problems.

You may want to give a closer look under the tractor for any pulled wires. Also check the fuses.

Yep, that痴 exactly what happened. Wire pulled lose under tractor!