146 john deere loader cylinder

[Devoo]

trying to take lift cylinder apart

 

[Leejohn]

ok, what's up?

 

[Devoo]

got the inside retaining ring out. Im trying to put the ram assembly back in the tube. the seals are a 5 piece fiber. they need to be warmed up ??

 

[Tx Jim]

Once outside snap ring is removed rod guide must be driven into cylinder barrel in order to relocate inner snap ring so guide can be removed from barrel.

 

[Devoo]

Once outside snap ring is removed rod guide must be driven into cylinder barrel in order to relocate inner snap ring so guide can be removed from barrel.

correct. how do I get the ram back into the barrel. The seal assembly is 5 part fiberous

 

[Leejohn]

To get the piston back in you can cut a pop can and make guide sleeve.