Buying Advice 1301d right front knuckle advice???

   / 1301d right front knuckle advice??? #1  

bobjr1

New member
Joined
Feb 23, 2006
Messages
13
Location
Rhode Island
Tractor
Yanmar 1301D
I recently rebuilt the right front knuckle on my Yanmar. I can't seem to get the seal to seat on the bottom of the housing. Does the bevel gear and bearing need to be pressed on further. It seems that everything is where it should be, but I don't want to force it. Does anyone have experience with a rebuild.
I have enclosed an image of the knuckle and the space. Thanks Bob.
 

Attachments

  • Knuckle.jpg
    Knuckle.jpg
    148 KB · Views: 192
   / 1301d right front knuckle advice??? #2  
You REBUILT the knuckle or you replaced the seal? Have you checked the bearings in the top of the assembly?
 
   / 1301d right front knuckle advice???
  • Thread Starter
#3  
Thanks for your reply. I rebuilt the entire knuckle new seats and shims, new bevel gear, and new bearings, and a new seal. IT seems that they are all seated firmly on the king pin and the all the gears engage. I just don't know if they need to be pressed on further. Sent a picture let me know if it helps. Thanks
 

Attachments

  • IMG_0193.jpg
    IMG_0193.jpg
    504.1 KB · Views: 189
   / 1301d right front knuckle advice??? #4  
Is it possible that to many spacer shims got put on? This could cause extra stack height. Another thought: Was the new bearing the same stack height as the old one? Keep us informed.

Dick
 
   / 1301d right front knuckle advice???
  • Thread Starter
#5  
Everything that came off went back on . No extra parts which is a good thing with me. The bearing I ordered from Aaron at Hoye and that is the first thing I checked stack height is the same as well as the new bevel gear. Can I get away with removing some spacers and shims?
 

Attachments

  • 4WDINTERNAL.jpg
    4WDINTERNAL.jpg
    105.6 KB · Views: 174
Last edited:

Tractor & Equipment Auctions

2012 UNVERFERTH 10-INCH FRONT WHEEL SPACER FOR 10 BOLT HUB (A53473)
2012 UNVERFERTH...
2011 Ford E-350 Passenger Van (A53422)
2011 Ford E-350...
2011 Kenworth T300 Jerr-Dan 21WSRB Rollback Truck (A52377)
2011 Kenworth T300...
14' Bi-Parting Gate (A50120)
14' Bi-Parting...
2013 MACK PINNACLE (A53843)
2013 MACK PINNACLE...
2018 FORREST RIVER CRUISE LITE CAMPER (A53843)
2018 FORREST RIVER...
 
Top